AJA HD10C2 HDTV Serial Digital to Component Converter
|
|
|
|
MANUFACTURER: AJA
PRODUCT CODE: HD10C2
|
|
The HD10C2, AJA's second generation HD D/A converter, brings exciting new features. In addition to being a high-quality 10-bit HD converter, the HD10C2 is "dual-rate" and works with both HD-SDI and SDI inputs. For HD-SDI inputs, the HD10C2 outputs full bandwidth HD component or VGA-style RGBHV video. For SDI inputs, component or composite SD outputs are supported. When connected to a multi-format monitor like the Sony 20L5, the HD10C2 will automatically provide an image from almost any HD or SD input format. The HD10C2 also features 2 equalized HD-SDI outputs.
FEATURES:
Low Cost, High Quality, 10-bit Dual Rate HD/SD D/A Conversion
Full Bandwidth HD Analog RGB or YPbPr Output (HD input)
Component/Composite SD Output (SD input)
2 Equalized Loop-Thru HD-SDI/SDI Outputs
RGBHV VGA style HD output using supplied adapter
HD Sync Selectable Between Bi-level and Tri-Level
4:3 Safe Area Graticule (HD)
5-18VDC Power
External Dipswitch Configuration
SPECIFICATIONS:
Formats: HD: 1080i @ 50/59.94/60 Hz, 1035i @ 50/50.94/60 Hz, 1080psf @ 23.98/24/25/29.97/30 (displayed as Interlaced), 720p @ 59.94/60 Hz, SD: 525 59.94Hz, 625 50Hz, Automatic Configuration
Inputs:
HD-SDI or SDI SMPTE 259/292/296, 10-bit, BNC
Input Equalization: 125 Meter 1694 Cable
Outputs:
HD: YPbPr, RGB (SMPTE-274)
SD: YPbPr (SMPTE/N10, Betaź RGB, Y/C, NTSC/PAL)
13W3 wideband analog output connector (cable supplied)
HD-SDI/SDI equalized loop-thru, 2 x BNC
Sync:
HD: Tri-level or Bi-level, H/V Drive
SD: normal SD sync
Frequency Response
HD: Y +0, -.5db to 30 MHz, C +/- .25db to 13 MHz
SD: Y +/- .25db to 5.5 MHz, C +/- .25db to 2.5 MHz
User Controls: External Dipswitch, YPbPr/RGB, Component/Composite (SD), SD Pedestal, SD Blanking, HD 4:3 Graticule, SD NTSC/NTSC-J, Sync on Video on/off
Power: +5-18VDC Regulated, 4 Watts, Power Supply Required (sold separately)
Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
|
 DOWNLOAD HD10C2 PRODUCT MANUAL
|
|
|
