The INTERACT AT premium audio conferencing system includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price. Customize your solution with multiple microphones and speaker options, direct connection to enterprise telephones, USB audio, a room controller, plus the ability to connect to the rich-media systems.

Main components of the solution include:

INTERACT AT mixer- Audio conferencing mixer with integrated 9-AEC channels, 2 Line Input/Output, Telephone interface and integrated amplifier. Provides advanced audio processing for superior sound quality. Note: The total number of microphone devices supported by the Interact AT mixer is three. It can be any combination of Interact Mic or Interact Mic Ex devices.

INTERACT MIC - INTERACT MIC is a microphone pod with 3-elements providing a complete 360 degree coverage. Audio from Interact Mic is sent to mixer via single Cat 5 cable using a digital transport method. A total of 3-Interact Mic devices can be used with a single mixer.

INTERACT MIC EX - INTERACT MIC EX is a microphone breakout device allowing up to three external microphone connections per unit. Each box contains three industry standard XLR microphone connectors and built in microphone pre-amp and phantom power for direct interface to any professional microphone. Boxes are daisy-chained from mixer using standard RJ-45 cables. Boxes can be rack-mounted with mixer or strategically positioned throughout room to minimize microphone cable runs. A total of 3-INTERACT MIC EX devices can be used with a single mixer.

INTERACT COM - The Interact COM is an audio interface device that can be used with either the Interact AT or Interact Pro systems. The device provides an interface to telephone sets via the headset port or to PC audio via a USB port.

INTERACT DIALER - The Interact Dialer is a tabletop controller that provides intuitive interface that emulates a telephone keypad.

INTERACT Software Application - The Interact Software is a Windows base application for programming, configuration, and control of the Interact Pro and Interact AT systems.

APPLICATIONS:

Unified Communications

Use with Rich-Media Systems: Web Conferencing, Personal Computer, IP Telephony, Video Conferencing

Board Rooms

Conference Rooms

Executive Offices

ADVANTAGES:

Enables Unified Communication in the conference room

USB port connects to PC for Skype, WebEx and other A/V conferencing applications

Headset port connects to Cisco, Avaya, and Nortel handsets

Sound quality exceeds traditional conference phone with ClearOne's HDConference technology
- Simplified installation combines all microphone signals onto a single data cable minimizing conduit and raceway requirements.
- Noise cancellation reduces background noises from fans or HVAC systems
- Automatic level controls keep participants' audio balanced and consistent

Scalable and flexable
- Wireless or wired controller option
- Multiple speaker mount options: wall, ceiling or custom
- Select appropriate number of MIC EX and MIC PODS (max three) to fit the applications

Integral network management system enables remote configuration, contol and monitoringInteroperates with NetStreamsT A/V over IP systems

Easy to install, program and use

SPECIFICATIONS

Audio Performance Conditions: Unless otherwise specified, all measurements are performed from 20 HZ to 15 kHz BW limit (No Weighting) Dynamic Range: > 80 dB (Non-A Weighted) THD+N: < 0.02 % Audio Mixer AEC tail time: 128 ms Adaptive Noise Cancellation: 6-15 dB Gating: Adaptive ambient, 1st Mic Priority, Look-ahead Gating Up to a total of 3 INTERACT MIC or INTERACT MIC EX devices can be connected to the INTERACT AT Mixer 48 kHz Sample Rate, 24-bit Resolution Audio Mixer Line Input Connection: Unbalanced RCA Impedance: 10 kO Nominal Level: -10 dBu Maximum Level: +9 dBu Audio Mixer Playback Connection: Unbalanced Left and Right RCA (Summed Internally) Impedance: 10 kO Nominal Level: -10 dBu Maximum Level: +15 dBu Audio Mixer Line Output Connection: Unbalanced RCA Impedance: 10 kO Nominal Level: -10 dBu Maximum Level: +9 dBu Audio Mixer Record Output Connection: Unbalanced Left and Right RCA (Mono Source Split Internally) Impedance: 10 kO Nominal Level: -10 dBu Maximum Level: +9 dBu Audio Mixer Amplifier Output Connection: Left and Right Push Terminals Power: 5 Watts Frequency Response: 20 Hz – 15 kHz (+/-1 dB) Dynamic Range: > 80 dB THD+N: < 0.50% (+5 dBu Line Input @ 1 kHz)

Telephone Interfacenterface Telephone Audio Performance Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled Frequency Response: 250 Hz to 3.3 kHz ±1 dB THD+N: < 0.30% re-max level 250 Hz to 3.3 kHz SNR: > 62 dB re-max level Telco Line Echo Cancellation Tail Time: 32 ms Null: 55 dB Nominal Telephone Noise Cancellation Noise Cancellation 6-15 dB Attenuation RS-232 Control Port DB9 Female Baud Rates: 9,600 / 19,200 / 38,400 / 57,600 (Default) / 115,200 Protocol: 8 Bit, 1 Stop, No Parity Hardware Flow Control ON (Default)/OFF USB Configurationonfiguration Port USB 1.1 Compatible Type: B Connector VISCA Camera Port Din, 9600 Baud, No Flow Control LAN 10/100 Ethernet RJ-45 with Activity LED Supports: Telnet, HTTP Link Bus Connection: RJ-45 with CAT5 Daisy-chained Maximum Distance: 60 feet from Mixer to last device in chain Maximum Number of INTERACT MIC Devices: 3 - Any Mix of INTERACT MIC or MIC EX Maximum Number of INTERACT COM Devices: 1 per INTERACT Mixer Configurationonfiguration Softoftware INTERACT Supports: Microsoft XP, Vista and Windows 7

INTERACT COM Versions: Wired or Wireless (2.4 GHZ) USB Audio Channel: USB 2.0 Compatible Connector: Mini Type B TX and RX Channel, 16-bit at 16 kHz Headset Audio Channel: Connector: RJ-9 Supported Telephone Sets: Most Cisco, Avaya, and Nortel Phones Audio Performance: Frequency Response: 40 to 3300 Hz, THD and Noise: < 0.04% Re-max Level with 0 dB Gain @ 1 kHZ, Dynamic Range: > 84 dB (Non A-Weighted) Audio Processing: Receive Automatic Level Control Line Echo Cancellation for Side-Tone Elimination GPIO: Pin 1: Global Mute (C) Pin 2: Global Mute (S) Pin 3: ON/OFF Hook (C) Pin 4: ON/OFF Hook (S) Pin 5: 5V DC up to 40 mA INTERACT DIALER Available in Wired or Wireless Versions Functions: Dialing, Volume Control, Mute Control Communications: Wired Version: RS-232 Connected to Mixer, Wireless Version: 2.4 GHz DSSS to INTERACT COM Wireless INTERACT MIC – Tabletop Microphone Coverage: 360° Frequency Response: 60 Hz- 14 kHz THD+N: < 0.08% (-45 dBu Input @ 1 kHz) Sensitivity: -45 dBu INTERACT MIC EX - Microphone Distribution Box Connection: Female XLR Balanced Maximum Level :+18 dBu Frequency Response: 20 Hz – 15 kHz THD + N: < 0.01 % Phantom Power: 24 V @ 10 mA Impedance: 5 kO per Leg or 10 kO Balanced

Power Supply Primary Voltage: 100 to 240 VAC Auto-Sensing, 50-60 Hz Power Consumption: 32 W Maximum Dimensions (W x D x H) INTERACT AT Mixer: 17” x 7.5” x 2” (43.2 cm x 19.1 cm x 5.1 cm) INTERACT DIALER: 10.5” x 4.5” x 2.75” (26.7 cm x 11.4 cm x 6.9 cm) INTERACT MIC EX: 4.7” x 5.6” x 1.7” (11.9 cm x 14.3 cm x 4.4 cm) INTERACT COM: 4.7” x 5.6” x 1.7” (11.9 cm x 14.3 cm x 4.4 cm) INTERACT MIC: Diameter: 7” (17.8 cm) Height: 1.5” (3.8 cm) Weight INTERACT AT Mixer: 4.5 lb. (2 kg) INTERACT DIALER: 2.0 lb. (0.9 kg) INTERACT MIC: 1.5 lb. (0.7 kg) INTERACT MIC EX: 1.5 lb. (0.7 kg) INTERACT COM: 1.5 lb. (0.7 kg) Compliance ROHS Compliant WEEE Compliant UL Safety Listed AES48-2005 AES Standard on Grounding and EMC Practice