REVOLABS 01-CLASSRM-11 Classroom Wireless Amplification System
|
|
|
|
MANUFACTURER: REVOLABS
PRODUCT CODE: 01-CLASSRM-11
|
|
**PLEASE NOTE:
01-CLASSRM-11 DOES NOT INCLUDE SPEAKERS
01-CLASSRM-BLK INCLUDES TWO BLACK SPEAKERS
01-CLASSRM-WHT INCLUDES TWO WHITE SPEAKERS
The Revolabs Classroom Wireless Amplification System allows the teacher to speak in a normal voice and the students can hear every word.
Superb Sound Quality Digital RF Simplicity
Unmatched audio performance with wireless convenience is brought into the classroom. The System will automatically select RF channels to avoid interference; it does not require the teacher to change channels to avoid interference as with IR Systems. Classroom System can be easily adjusted to the appropriate power setting to allow systems to be used in adjacent classrooms.
Unobtrusive Microphone
The Classroom Amplification System includes a Revolabs RF Armor Wearable Wireless Microphone. It is small and ultra light, measuring just 2.5 inches high, about one inch across and weighing mere ounces. Also, it is impervious to GSM noise from cell phones and PDAs.
Rechargeable, No Batteries or Battery Packs
The Revolabs Wireless Microphone is rechargeable and the battery provides eight hours of talk time, a full school day, so there are no batteries or battery packs to worry about. A recharge to 85 percent capacity can be attained in about 45 minutes. The System includes a Charger Base which can be put anywhere there is a standard electrical outlet. This allows the Wireless Microphone to be stored and charged in a locked office or closet.
Cost-effective
The Revolabs Classroom Wireless Amplification System comes with everything needed to install an amplification system in a classroom environment. 01-CLASSRM-11 includes the Revolabs RF Armor Wearable Wireless Microphone, a Charger Base, and a Transmitter/Receiver. 01-CLASSRM-11 does NOT include powered speakers.
Easy-to-Use
Once installed, the teacher or professor simply removes the Wireless Microphone from the Charger Base, clips it on a lapel or the lanyard provided, and un-mutes the System by pressing the Mute Button on the microphone. The microphone is muted when it is removed to eliminate any noise that may occur while the teacher puts the microphone on. The Mute Button is very accessible and can be turned on and off easily. When finished with the microphone, it is placed back in the Charger Base to recharge.
Easy-to-Install
Simply install the speakers (NOT INCLUDED in 01-CLASSRM-11 package). Attach the Transmitter/Receiver Box to the powered speaker, cable them together
and plug them both into a wall power outlet. Charge the Wireless Microphone in the Charger Base after plugging
the Base into a power source.
SPECIFICATIONS:
WIRELESS MICROPHONE:
Size: 0.9 (2.3 cm) x 0.8 (2.03 cm) x 2.6 (6.6 cm)
Weight: 0.05 lb (0.02 kg)
Radio Frequency: 1.92-1.93 GHz (DECT in UPCS)
Acoustic Pickup Pattern: Cardiod
Range: 65 (20 m) approximately, various settings, Out-of-range alarm
Battery: Lithium Polymer, Up to 8 hours talk time
Audio Bandwidth: 100-6800 Hz
Encryption: 128-bit
Includes: 24 (60.96 cm) Lanyard
TRANSMITTER/RECEIVER:
Size: 3.9 x 2.4 x 1.0 (10 cm x 6 cm x 2.56 cm)
Connectors:
Power-5V DC, proprietary 0.7 mm
Mini USB-5 pin connector
Audio unbalanced In/Out 2.5mm
Tip: Audio Out
Ring: Audio In
Shield: GNC
Power Adapter: 110V AC, 60Hz to 5V DC, 300mA
CHARGER BASE:
Size: 3.9 x 2.4 x 1.0 (10 cm x 6 cm x 2.56 cm)
Power Adapter: 110V AC, 60Hz to 5V DC, 300mA
|
 DOWNLOAD 01-CLASSRM-11 BROCHURE
|
|
|
